DIN 17175 Stardard Alloy Seamless Steel Pipes

Mubo nga paghulagway:

Ang DIN 17175 alloy steel pipe kay heat resistant pipe ug gigamit alang sa taas nga pressure ug hangtod sa 600 ℃, ang mga aplikasyon nga gisang-at naglakip sa: pagtukod sa mga boiler, pipe-lines, pressure vessels ug equipment.


Detalye sa Produkto

Mga Tag sa Produkto

Pagpaila sa Produkto

Ang DIN 17175 gidisenyo alang sa taas nga temperatura nga mga katuyoan, ANSON suplay sa pagsunod sa steel grado: St35.8, St45.8, 15Mo3, 13CrMo44, 10CrMo910.Ang DIN 17175 nga seamless steel pipe kaylap nga gigamit sa mga gamit sa pagbinayloay sa init.Kining ubos nga grado sa alloy adunay mahinungdanong mga pagdugang sa molybdenum ug manganese niini.Gawas sa paggamit niini sa mga sistema sa boiler, mapuslanon kini alang sa mga aplikasyon sa industriya sa lana, gas ug kemikal.Kasagaran, kini nga mga industriya naggamit sa mga heat exchanger, ingon usa ka paagi sa pagbalhin sa kainit taliwala sa duha o daghan pa nga mga solusyon.Ang mga tubo ubos sa DIN 17175 gigama gikan sa carbon ug low-alloy steel nga mga grado nga makasugakod sa mga karga ubos sa taas nga presyur ug temperatura.Gigamit kini alang sa pagtukod sa mga gamit sa power engineering sama sa: boiler, heating coils, stoves, heaters, heat exchanger tubes.

Ang DIN 17175 nga seamless steel pipe gigamit alang sa mga instalasyon sa boiler, high-pressure pipelines ug tank construction ug espesyal nga makinarya para sa taas nga temperatura ug high-pressure nga mga himan (Labaw sa 450 ° taas nga temperatura).Ang ANSON usa ka eksperyensiyado nga boiler ug pressure steel tube supplier nga makahatag kanimo DIN 17175 steel pipe sa tanan nga grado ug dimensyon nga hanay.

Pagpakita sa Produkto

DIN 17175 Alloy Steel Pipes5
DIN 17175 Alloy Steel Pipes3
DIN 17175 Alloy Steel Pipes2

Configuration sa Produkto

Kondisyon sa Paghatud:
Annealed, Normalized, Normalized ug Tempered.

Inspeksyon ug Pagsulay:
Inspeksyon sa Komposisyon sa Kemikal, Pagsulay sa Mechanical Properties (Tensile Strength, Yield Strength, Elongation, Flaring, Flattening, Bending, Hardness, Impact Test), Surface and Dimension Test, No-destructive Test, Hydrostatic Test.

Pagtambal sa nawong:
Oil-dip, Varnish, Passivation, Phosphating, Shot Blasting.

Inner packing:
Mga takup sa duha ka tumoy sa matag tubo.

Pakete:
hubo nga packing/bundle packing/wooden carton packing.

Kemikal nga Komposisyon(%)

Grado

Kemikal nga Komposisyon (%)

C

Si

Mn

P

S

Ni

Cr

Mo

Ang uban

St35.8 0.17Max 0.10~0.35 0.40~0.80 0.040Max 0.040Max - - - -
St45.8 0.21Max 0.10~0.35 0.40~1.20 0.040Max 0.040Max - - - -
17Mn4 0.14~0.20 0.20~0.40 0.90~1.20 0.040Max 0.040Max - 0.30Max - -
19Mn5 0.17~0.22 0.30~0.60 1.00-1.30 0.040Max 0.040Max - 0.30Max - -
15Mo3 0.12~0.20 0.10~0.35 0.40~0.80 0.035Max 0.035Max - - 0.25~0.35 -
13CrMo910 0.10~0.18 0.10~0.35 0.40~0.70 0.035Max 0.035Max - 0.70~1.10 0.45~0.65 -
10CrMo910 0.08~0.15 0.50Max 0.40~0.70 0.035Max 0.035Max - 2.00-2.50 0.90~1.20 -
14MoV63 0.10~0.18 0.10~0.35 0.40~0.70 0.035Max 0.035Max - 0.30~0.60 0.50~0.70 V: 0.22~0.32
X20CrMoV121 0.17~0.23 0.50Max 0.40~0.70 0.030Max 0.030Max 0.30~0.80 10.00~12.50 0.80~1.20 V: 0.25~0.35

Mga Kinaiya sa Mekanikal

Grado

Materyal nga

MPa o N/mm2

Numero

Minuto nga Yield Point

Kusog sa Tensile

 

WT: 16mm Max

WT: 16-40mm

St35.8

1.0305

235

225

360~480

St45.8

1.0405

-

245

410~530

17Mn4

1.0481

-

275

460~580

19Mn5

1.0482

-

315

510~610

15Mo3

1.5415

275

275

450~600

13CrMo910

1.7335

295

295

440~590

10CrMo910

1.738

285

285

450~600

14MoV63

1.7715

325

325

460~610

X20CrMoV121

1.4922

490

490

690~850


  • Kaniadto:
  • Sunod:

  • May Kalabutan nga mga Produkto